Thursday, 30 August 2012

Protex FW-1814Z Biometric Wall Safe-How to Enrol Fingerprints




Protex Fingerprint Wall Safe

The FW-1814Z biometric safe is a new finger print wall safe from Protex Safes and is modeled after the very well constructed PWS-1814E. Tthe major difference being the use of fingerprint technology to gain access to valuables secured in the safe. The fingerprint technology used by this high tech biometric safe simply requires a fingertip scan to provide quick and easy access.




Power Override Box
The FW-1814Z biometric safe has to be opened to install four (4) AA batteries in the black box located in the back of the door, inside the safe. This is a straightforward procedure that requires the wall safe to be in an upright position, not laying down. The FW-1814Z biometric safe comes with a power override box that is used to open the safe for the first time.

Wake-up Button - Right of Slot
Firstly, place four AA batteries in the power override box and plug it into the hole located on the door below and to the left of the fingerprint reader. Then press the wake-up button located on the scanner located at the right of the fingerprint slot and place a finger on the glass scanner until the LED turns green followed by a long beep. The safe door will slowly spring open. With the door open install the four AA batteries inside the door of the biometric safe.

Setup Button


To enroll fingerprints to the biometric safe memory open the safe as already outlined.  When the safe door is open locate the red setup button located on the back of the door and press. The scanner will begin to flash red. While the scanner flashes red, immediately place your finger (preferably your index) flat on the fingerprint scanner.

Wait until the scanning process is completed and the green LED goes on twice with two beeps. Remove your finger from the scanner; your fingerprint is now recorded. The FW-1814Z biometric safe is able to store thirty different fingerprints by repeating the procedure described.

Fingerprints can be deleted but the catch is that all users must be deleted. You cannot delete individual users. To delete fingerprints stored in the biometric safes memory the wall safe must be initialized back to factory settings. The initialization process is very straightforward and only takes a minute or two.

 To close the safe, push and hold the door shut, press the wake-up button and wait until the safe is locked. When the biometric safes door is closed the locking bolts can be heard extending to the locked position.

Monday, 27 August 2012

Hollon Safe PDO RG-39C Republic Series Fireproof Gun Safe


The interior dimensions of the PDO RG-39C Hollon Republic Series fireproof gun safe (56” high x 36.5” wide x 16.75”’ deep) provides 22.5 cubic feet of interior storage space. The dimensions provide long gun capacity of 39 rifles inside the safe plus extra storage using the pocket door organizer. The quoted gun capacity of 39 rifles will vary and is dependent upon the size of the rifles and accessories.
PDO RG-39C with Door Organizer
The body of the gun safe is constructed using 9 gauge plate steel and is 1.25” thick consisting of two layers of fireboard one inch thick The door is 5” thick with three layers of fireboard 1.5” thick. The safe is Torch Resistant Fire Rated for one-hour fireproof protection at 1250 degrees Fahrenheit. In the event of a fire weapons secured in the RG-39C gun safe are protected from water and smoke damage by heat activated intumescent door seal designed to seal out smoke and water.

Burglary protection comes by way of the design and steel used in the construction of these high quality fireproof gun safes. The body of the gun safe is constructed of 9 gauge seamless steel and the 5” door has ¼" (3 gauge) solid steel plate added to the entire door plus drill/ballistic armored hard plate to protect the lock.
The PRO RG-39C gun safe has seven (7) active steel 1 1/2” locking bolts and three (3) 1 ½” fixed locking bolts on the hinged side. All the locking bolts are chrome plated solid steel. To prevent punch attacks the RG39 has an active spring-loaded re-locker.

External hinges allow full 180 degree door opening and removal of the gun safe door for maintenance or repair. While the safe has an unloaded weight of 650lbs it still comes with pre-drilled anchor holes to allow the gun safe to be bolted into position making it impossible for thieves to make off with the safe.
The interior of the RG39 gun safe has four removable shelves; three small adjustable shelves and one full length adjustable shelf, and is finished in a soft plush tan trim.

The design of this fireproof gun safe far exceeds California Department of Justice Regulatory Standards for Residential Security Containers and is well priced for a safe of this design and construction.

Sunday, 19 August 2012

RSV-5930C – Reserve Series 22 Gun Fireproof Gun Safe


Like the RSV-5922C sixteen gun capacity gun safe the Hollon Safe Reserve Series RSV-5930C is also a fireproof gun safe having a long gun capacity of 22 rifles. Unlike the more expensive PRO RG-22 Republic Series gun safe the RSV-5930C does not come with a pocket door organizer. The quoted gun capacity of 22 rifles will vary and is dependent upon the size of the rifles and accessories.
The safe is Torch Resistant Fire Rated for one-hour fireproof protection at 1250 degrees Fahrenheit. To ensure weapons secured in the RSV-5930C gun safe are protected in the event of a fire the safe door has a heat activated intumescent door seal designed to seal out smoke and water.

Fireproofing in the 1.25” thick body of the safe consists of two layers of fireboard one inch thick while the 5” thick door has three layers of fireboard 1.5” thick. Burglary protection comes by way of the design and steel used in the construction of these high quality fireproof gun safes. The body and door of the gun safe is constructed of 10-gauge seamless steel with the door having a drill/ballistic armored hard plate to protect the lock.
The RSV-5930C has seven (7) active steel 1” locking bolts and three (3) 1” fixed locking bolts on the hinged side. All the locking bolts are chrome plated solid steel. To prevent punch attacks the RSV-5930C has an active spring-loaded re-locker.

External hinges allow full 180 degree door opening and removal of the gun safe door for maintenance or repair. Pre-drilled anchor holes allow the 350 lb (unloaded weight) gun safe to be bolted into position making it impossible for thieves to make off with the safe.
The interior of the RSV-5930C gun safe has four removable shelves - three small adjustable shelves and one full length adjustable shelf, a removable gun rack and finished in a soft plush grey trim.

The design of this fireproof gun safe far exceeds California Department of Justice Regulatory Standards for Residential Security Containers and is well priced for a safe of this design and construction. As quoted by Hollon Safe, “Each Hollon Safe is designed to the top of our industries standards and then a little higher to ours. We maintain one of the highest standards of design and durability in the industry”.

Tuesday, 14 August 2012

PDO RG-22C Republic Series Fireproof Gun Safe.


The interior dimensions of the PDO RG-22C Hollon Republic Series fireproof gun safe (56” high x 27.5” wide x 17 ¼’ deep) provides 16.93 cubic feet of interior storage space. The dimensions provide long gun capacity of 22 rifles inside the safe plus extra storage using the pocket door organizer. The quoted gun capacity of 22 rifles will vary and is dependent upon the size of the rifles and accessories.

The body of the safe is 1.25” thick consisting of two layers of fireboard one inch thick while the door is 5” thick with three layers of fireboard 1.5” thick. The safe is Torch Resistant Fire Rated for one-hour fireproof protection at 1250 degrees Fahrenheit. In the event of a fire weapons secured in the RG-22 gun safe are protected from water and smoke damage by heat activated intumescent door seal designed to seal out smoke and water.
Burglary protection comes by way of the design and steel used in the construction of these high quality fireproof gun safes. The body of the gun safe is constructed of 9 gauge seamless steel and the 5” door has ¼" (3 gauge) solid steel plate added to the entire door plus drill/ballistic armored hard plate to protect the lock.

The PRO RG-22 gun safe has seven (7) active steel 1 1/2” locking bolts and three (3) 1 ½” fixed locking bolts on the hinged side. All the locking bolts are chrome plated solid steel. To prevent punch attacks the RG22 has an active spring-loaded re-locker.
External hinges allow full 180 degree door opening and removal of the gun safe door for maintenance or repair. While the safe has an unloaded weight of 650lbs it still comes with pre-drilled anchor holes to allow the gun safe to be bolted into position making it impossible for thieves to make off with the safe.

The interior of the RG22 gun safe has four removable shelves; three small adjustable shelves and one full length adjustable shelf, and is finished in a soft plush tan trim.

The design of this fireproof gun safe far exceeds California Department of Justice Regulatory Standards for Residential Security Containers and is well priced for a safe of this design and construction.

Monday, 13 August 2012

YourSafesOnline – Fireproof Safes, Gun Safe Cabinets, Biometric Safes, Gun Safes


Please enter our store, www.yoursafesonline.com to find a solution to your security requirements from our ranges of:





For home or office we have the most reliable fireproof safes on offer and all our fireproof safes are designed to exceed industry standards. We have all heard of the saying, “Your home is your castle,” and so have the burglars. Statistics show two thirds of burglaries are residential and only 15% are solved. To secure paperwork, valuables and guns our fireproofsafes for home, gun cabinets, gun safes and biometricsafes offer both fire and burglary safe solutions at affordable prices. With a variety of sizes to choose from you will find fireproof safes, gun safes, gun cabinets and biometric safes to meet your needs.

Biometric safes also known as fingerprint safes are suitable for home and office.The burglary biometric safes are fireproof safes and provide cutomers with the next generation of biometric safes.

Our home might be our castle but our business is our livelihood. For money management, business owners will find our drop safesand depository safes are a must for safeguarding their business against the temptations that comes when dealing with cash. Depository and drop safes are not fireproof safes. There is a depository safe or drop safe to suit any size business or business requirement, Also, don’t forget to look at the ranges of hotel safes, wallsafes and floor safes. Our gun safes and biometric safes categories provides gun cabinets solutions for all enthusiasts. All gun safes and gun cabinets are built to exceed Californian Department of Justice Standards.
From a fireproof safe for valuables, to gun safes for weapons security and for new generation biometric safes our store is open for business

Wednesday, 8 August 2012

RSV-5922C – Reserve Series Sixteen Gun Fireproof Gun Safe

The RSV-5922C fireproof gun safe is the smallest of the Hollon Reserve series of fireproof gun safes having a long gun capacity of 16 rifles. Unlike the more expensive PRO RG-16 Republic Series gun safe the RSV-5922C does not come with a pocket door organizer. The quoted gun capacity of 16 rifles will vary and is dependent upon the size of the rifles and accessories.


RSV-5922
The safe is Torch Resistant Fire Rated for one-hour fireproof protection at 1250 degrees Fahrenheit. To ensure weapons secured in the RG-16 gun safe are protected from water and smoke damage in the event of a fire the safe door has a heat activated intumescent door seal designed to seal out smoke and water.

Fireproofing in the 1.25” thick body of the safe consists of two layers of fireboard one inch thick while the 5” thick door has three layers of fireboard 1.5” thick. Burglary protection comes by way of the design and steel used in the construction of these high quality fireproof gun safes. The body and door of the gun safe is constructed of 10-gauge seamless steel with the door having a drill/ballistic armored hard plate to protect the lock.
RSV-5922 Shelving
The RSV-5922C has seven (7) active steel 1” locking bolts and three (3) 1” fixed locking bolts on the hinged side. All the locking bolts are chrome plated solid steel. To prevent punch attacks the RG16 has an active spring-loaded re-locker.

External hinges allow full 180 degree door opening and removal of the gun safe door for maintenance or repair. Pre-drilled anchor holes allow the 350 lb (unloaded weight) gun safe to be bolted into position making it impossible for thieves to make off with the safe.
The interior of the RSV-5922C gun safe has four removable shelves - three small adjustable shelves and one full length adjustable shelf, a removable gun rack and finished in a soft plush grey trim.

The design of this fireproof gun safe far exceeds California Department of Justice Regulatory Standards for Residential Security Containers and is well priced for a safe of this design and construction.

Friday, 3 August 2012

Gun Safety – Secure Guns in a Gun Safe

This year across the country background checks on people purchasing concealed firearms is up an average of ten percent. Carrying a concealed weapon in public is legal in forty-nine of the fifty US states, as long as you have a permit; there is also a requirement that firearms are secured when not being carried. Reports are also showing large amounts of ammunition are also being sold. These sales of guns and ammo are in line with spikes in requests for secluded pistol licenses whenever there is a gun related tragedy.

AX11678 Compact Gun Safe
Guns left in a car must be locked, concealed from view and preferably secured in a gun safe. The AX11812 Compact Key Lock Safe is an ideal size gun safe for the car or when travelling.  When being used in motor vehicles as a gun safe the AX11812 can be mounted using the included steel mounting sleeve and mounting hardware. For gun owners looking for a combination lock gun safe the AX11678 Combination Compact Gun Safe features solid steel construction and comes with a long self-locking security cable to keep the gun safe secured to a large fixed object inside the vehicle.


AX116522 Biometric Gun Safe
For the home and office, there are multiple types of safes suitable for use as a gun safe. There are gun safes specifically made for long guns and pistols that includes safes featuring biometric, combination, key and electronic keypads. Fireproof home safes come in many sizes and are perfect for use as a gun safe and there is a safe for all budgets. Wall safes and floorsafes are also used as gun safes and provide the added security of stealth when securing guns from inquisitive children.
If yours is one of the 40% of US homes with guns and one of the 50% that doesn’t have a gun safe now is the time to purchase a gun safe and give children, visitors and family the security they deserve.

Gun Security - There are over 1,500 accidental firing fatalities a year in the United States. What is alarming is that guns are the second highest cause of non-natural deaths for children in the United States. Surveys reveal 40% of US homes with children have guns and that 50% of homes with guns do not store the firearms safely.
The American Academy of Paediatricians (AAP) recommends:
  • The gun should be locked up
  • The gun should not be loaded
  • Ammunition should never be stored with the gun
  • Ammunition should be locked away separately to the guns
  • Safe keys or combinations should not be available to children
To secure guns the best protection is a fireproof gun safe. A good gun safe offers both fire protection and in the event of fire water protection from the gallons of water used to extinguish the blaze.